“How to start working with electronic projects” or “ How to make electronic circuit project ” is the biggest problem or question for any newbies in electronic. In the world of Internet a lot of resource is available in a single click but it is really very tough to find relevant information related to your project work. Exactly people don’t know what they required and if you don’t know what you need to learn you will waste a lot of time over internet. So here in this article I will focus on the easiest way for developing of your own idea with electronic.
So, if you are searching for “ How to make electronic circuit project ”, you are in the right page because here you will get a correct approach for electronic circuit project.
So let’s start.
Understand Current, Voltage and Resistance
Current, Voltage and Resistance is basic of electronic if you want to play with electronic, you must have the knowledge of current, Voltage and Resistance. So first understand Ohm`s Law and practice some Problem, correlate with your electronic project.
Use Circuit Diagram on paper sheet
After learning Ohms Law, create some basic circuit on your paper sheet because on paper you can easily understand working mythology of circuit. Also on sheet you can find some bug in your circuit. So correct it and re-draw your circuit. Remember that if your circuit is OK on sheet, it will work in real world.
Understand functionality of Basic Electronic Component
In electronic there are a lot of component, but for basic electronic you don’t need to know functionality of all components. For basic circuit or Hobby project go through these components
- LED: It is required for indication of any circuit.
- Capacitor: It is very basic element, every circuit required capacitor.
- Resistor: Without resistor you can imagine any electronic so very important for beginners.
- Transistor: Very Basic element for electronic switching and amplification of any analog signal.
- Relay: Used in switching and driving circuits.
The above listed elements are more than sufficient to make small hobby projects. So read all necessary details of listed elements.
Learn about Printed Circuit Board and Bread Board
If you want to work in small electronic circuits, you must have knowledge of “Bread Board”. It is nothing but a practice board on which can assemble electronic component. After it go for PCB or printed circuit board.
Soldering on Printed Circuit Board
You all have seen a green electronic board with electronic component. This board is called Printed Circuit Board. Here if you want to fix any electronic component, you have to learn about soldering.
But be careful, because soldering is a little bit risky for kids so do it in the presence of parents.
Do some fun with Transistor
After learning above points, let’s do some practice with electronic components. So find some Transistor switching circuit and understand it on paper. After it use breadboard or PCB and start practicing.
By using relays with transistors you will know how to control things like light bulbs, Motor etc.
Understand feedback system
Feedback system plays very important role in electronic circuit. So concentrate on feedback sensors like LDR or light dependent resistance, Pressure Sensors and Limit Switches. Explore its functionality and working principle. And the most important, Learn “How to Use Sensors?”
Related Article: Why Feedback Control System is important for a Robotic Project?
With this method I hope that you will be able to work on some basic electronic circuit so start your work, but if you still required some assistance on your electronic project visit Yantra or Contact Us. We will always be happy to help you.